Botou Xiangyun Environmental Protection Equipment Co., Ltd.
Contact: Manager Wang
Contact number: 13901136018
Address: South of Wugang Road, Jiaohe Town, Botou City, Cangzhou City, Hebei Province
FU series scraper conveyor
The scraper conveyor is composed of a head, an intermediate tank, a tail, a scraper conveyor chain, a transmission device, and a corbel installation. The process layout is flexible, it can be arranged on the elevated, ground or tunnel, and can be installed horizontally or inclined at ≤15°. Conveying of fu scraper conveyor
The scraper conveyor is composed of a head, an intermediate tank, a tail, a scraper conveyor chain, a transmission device, and a corbel installation. The process layout is flexible, it can be arranged on the elevated, ground or tunnel, and can be installed horizontally or inclined at ≤15°.
fu scraper conveyorThe conveying principle: the material itself has friction and side pressure. This is because it is pulled by the conveying chain in the direction of movement, which increases the pressure inside the material and the internal friction between particles. When horizontally transported, this internal friction The force ensures the stable state between the material layers, thus forming a continuous material flow. When the internal friction force of the material layer is greater than the external friction force between the material and the groove wall, the material advances with the conveyor chain. When the ratio of the material layer height to the machine groove width meets certain conditions, the material flow is stable.
Because the fu scraper conveyor is a fully enclosed shell, no material will be discharged when the equipment is running; the conveyor chain adopts high-quality roller chains, single-chain layout, and has a long service life; the equipment inlet and outlet can be flexible according to process requirements Design the conveying length to realize multi-point feeding and discharging.
The rear end is equipped with a screw adjusting device to adjust the tightness of the conveyor chain to ensure that the conveyor chain is always properly tensioned during operation, so that the equipment is in a stable operation state.